LINK ECU CAN LAMBDA With Bosch LSU 4.9 Lambda Sensor
CAN Lambda Link’s CAN-Lambda is an easy to use CAN-module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs. The CAN-Lambda’s ability to...
Regular price £39000 £390.00
LINK ECU G4 G4+ G4X 4 bar MAP Sensor & Connector / Plug
LINK Ecu G4 G4+ G4X 4 bar MAP Sensor & Connector / Plug 4 Bar MAP Sensor MAP Sensor capable of reading up to 4 Bar (3 Bar of boost)...
Regular price £15000 £150.00
Link ECU G4+ G4X 1/8NPT Air Temp Temperature Sensor (IAT1-8)
Link G4+ G4X Air Temp Sensor (IAT1-8) 1/8" NPT complete with plug and terminals
Regular price £9500 £95.00
Link ECU G4+ G4X Pressure Sensor PS150
Link G4+ G4X Pressure Sensor PS150 Pressure Sensor, oil or fuel, 10 Bar/150psi, NPT Thread
Regular price £22500 £225.00
Link ECU G4+ G4X 10 Bar and 140 degree Combined Pressure & Temperature Sensor
Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Coolant, Fuel, Transmission fluid...
Regular price £14500 £145.00
Link ECU G4+ G4X Knock Sensor with Loom KNSB
Link Engine Management - Knock sensor with loom to suit Link ECU
Regular price £12750 £127.50
Link ECU G4+ G4X Ethanol Content Sensor ECS
Link G4+ G4X Ethanol Content Sensor ECS Ethanol Content sensor measures the ratio of petrol in a flex fuel vehicle Comes with an An-6 fitting
Regular price £26000 £260.00
Link ECU G4+ G4X Exhaust Gas Temperature Probe Sensor EGT
EXHAUST GAS TEMPERATURE PROBE Extreme Duty Fast Response EGT Temperature Probe Type K thermocouple probe Exposed sensing junction for fastest response Includes 316 SS adjustable compression fitting Stainless steel protected...
Link ECU G4+ G4X Crank Angle Sensor (CAS)
Link ECU G4+ G4X Crank Angle Sensor (CAS) Used in conjunction with a trigger wheel to measure crank angle, a vital measurement for engine operation. Can be used with almost...
LINK ECU G4+ G4X Knock Link KnockLink Engine Knock Detection Light with Knock Sensor with Loom KNLK
This Kit Includes: Knock Link Knock Sensor With Loom The KnockLink G4 is the only device on the market that requires no setup. Other systems require time consuming gain, frequency...
Regular price £33500 £335.00
Link G4+ G4X Air Temperature Sensor (IATB)
LINK G4+ G4X AIR TEMPERATURE SENSOR (IATB)COMPLETE WITH PLUG AND TERMINALS
Link ECU G4+ G4X M12 Coolant Temp Temperature 026 Sensor (NTC12)
Link G4+ G4X Coolant Temperature Sensor (NTC12) M12 Sensor - Complete with plug and terminals
Regular price £7450 £74.50
Link ECU G4+ G4X 1/8 BSP Coolant Temp Temperature Sensor (NTC1-8)
Link G4+ G4X Coolant Temperature Sensor (NTC1-8) Complete with plug and terminals
LINK ECU G4 G4+ G4X 1.15 bar MAP Sensor & Connector / Plug
LINK ECU G4 G4+ G4X 1.15 MAP Sensor MAP Sensor capable of reading up to 1.15 Bar (0.15 Bar of boost) Includes 1.15 Bar MAP Sensor and plugs and pins....
Regular price £13500 £135.00
LINK ECU G4 G4+ G4X 2.5 bar MAP Sensor & Connector / Plug
LINK ECU G4 G4+ G4X 2.5 MAP Sensor & Connector / Plug 2.5 Bar MAP Sensor capable of reading up to 2.5 Bar (1.5 Bar of boost) Includes 2.5 Bar...
LINK ECU G4 G4+ G4X 3 bar MAP Sensor & Connector / Plug
LINK Ecu G4 G4+ G4X 3 bar MAP Sensor & Connector / Plug 3 Bar MAP Sensor capable of reading up to 3 Bar (2 Bar of boost) Includes 3...
Regular price £14850 £148.50
LINK ECU G4 & G4+ & G4X 8 Bar MAP Variohm Eurosensor Sensor EU MAP8EU
The 8 Bar MAP Variohm Eurosensor reads up to 7 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 7 Bar (or...
LINK ECU G4 & G4+ & G4X 5 Bar MAP Variohm Eurosensor Sensor EU MAP5EU
The 5 Bar MAP Variohm Eurosensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 4 Bar (or...
Regular price £20500 £205.00
Link ECU G4+ G4X Hall Effect Sensor
Link ECU G4+ G4X Hall Effect Sensor Hall effect sensor designed for use in applications where ferrousedge detection/near zero speed sensing is needed. They provide a sinking current output. Typical automotive...
Regular price £8000 £80.00
Weld in Mounting Alloy Boss For Use for use with Link G4X 1/8" BSP Sensor
Weld in Aluminium boss, 1/8" BSP Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" BSP Thread.
Regular price £2900 £29.00
Weld in Mounting Steel Boss For Use with Link G4X 1/8" BSP Sensor
Weld in steel boss, 1/8" BSP Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" BSP Thread.
Link ECU G4+ G4X 140 Bar High Pressure Fluid Sensor
High Pressure sensor for Liquid. Use for Fuel, Clutch, Brake etc. 140 Bar/2030PSI 45degree cone seat M10x1 Thread Includes mating connector kit Technical Specs: Up to 2030 PSI above atmospheric...
Regular price £17000 £170.00
Link ECU IAT Intake Air Temp Sensor Mounting Boss - Steel or Aluminium
Link ECU IAT Intake Air Temp Sensor Mounting Boss Steel & Aluminium Available Weld in - Suitable for IAT Sensors and other sensor Mounting.
Anti / Counter Clockwise Throttle Position Sensor TPS LINK ECU EMERALD MOTEC SYVECS
Anti/Counter Clockwise Throttle Position Sensor TPS for use with LINK ECU EMERALD MOTEC SYVECS Anti/ Counter Clockwise throttle position sensor - Grey centre Any Question Let us Know!
Regular price £12800 £128.00
Clockwise Throttle Position Sensor TPS LINK ECU EMERALD MOTEC SYVECS
Clockwise Throttle Position Sensor TPS compatible with LINK ECU EMERALD MOTEC SYVECS Clockwise throttle position sensor - black centre